Stripe Bank Transfers, the Cash Balance and QuickBooks
Stripe bank transfers land in the customer cash balance before they pay anything.
A customer owes you three invoices. They send one bank transfer for $2,000 with "INV-0102 and payment on account" in the memo. Stripe pays two invoices in full, and the second one isn't the invoice the customer meant the extra for. A week later another customer sends $1,950 against a $2,000 invoice, the invoice stays open, and the money doesn't show up in your Stripe balance at all.
Both outcomes follow rules, and Stripe documents them in unusual detail. The rules decide which invoices get paid, where unmatched money waits, and what happens to money nobody claims. Those same rules decide what your QuickBooks file sees and when. This guide walks through Stripe bank transfers on invoices end to end: the virtual account, the matching order, unmatched funds in the customer cash balance, refunds, and what each step means for QuickBooks Online. If your Stripe invoices reach QuickBooks through Acodei, the section near the end covers what Acodei's documentation says and where it stops. Start a free trial.
How a Stripe bank transfer invoice works
Bank transfers are a push payment. You don't pull money from the customer's account the way you do with a card or a debit. You tell them where to send it, and they send whatever amount they decide to send.
Stripe's invoicing bank transfer guide describes the setup: "Stripe creates a unique virtual bank account number and displays it on the invoice PDF and the hosted invoice page, so your customers know where to send the funds." The virtual account belongs to that customer. Stripe lists its properties: unique ("No customers have the same account number"), consistent ("A single customer consistently receives the same funding instructions across multiple invoices") and currency-appropriate, with local bank details where bank transfers are supported. Your own bank details never appear on the invoice.
Because the customer controls the amount, Stripe puts a holding area between the transfer and your invoices. Its bank transfer payments overview explains why: "bank transfers don't allow you to control the amount a customer sends to you, which means that customers might send too much or too little money by accident." Every incoming transfer lands first in that customer's cash balance. Stripe then tries to reconcile it against what the customer owes.
The cash balance is not a wallet and it is not your money yet. Stripe's customer balance page says you "can't add funds to the customer cash balance directly," that it is "only there as a reconciliation layer," and that it can't be used "for any other purpose besides future payments, or returns to the customer it's associated with." Our glossary entry on the Stripe cash balance covers the object and its transaction types in detail. This post is about the flow.
Turning it on takes one setting for USD and GBP invoices: Settings, Billing, Invoices, Default payment methods, then turn on Bank transfer. For other currencies, Stripe says "you can't enable bank transfers as a default payment method," but you can add it to individual invoices. Presentment currencies are EUR, GBP, JPY, MXN and USD.
How Stripe matches a transfer to your open invoices
By default every customer is in automatic reconciliation mode. When a transfer arrives, Stripe works through a fixed order, documented in its reconciliation guide. For bank transfers in the US, UK, EU and Mexico, the order is:
- Reference match to an invoice. Stripe "initially attempts to match a bank transfer reference with a single invoice that has a matching invoice number." A memo like "Payment for INVOICE-0001" is enough.
- Reference match to a PaymentIntent. If no invoice matches, Stripe tries the reference stored on an incomplete PaymentIntent's bank transfer instructions.
- Exact amount, one to five objects. With no usable reference, Stripe searches "for a group of between one and five invoices and PaymentIntents awaiting the exact amount available in the cash balance." When several groups qualify, it picks the smallest group, then the one with the most invoices, then the one with the oldest PaymentIntents.
- Oldest due first. If no group adds up exactly, Stripe funds "as many invoices that can be fully funded, starting with the oldest due ones first."
- Leftovers to PaymentIntents. Anything remaining goes to incomplete PaymentIntents, oldest first.
JPY works differently. It skips the reference steps and starts at the exact-amount search, then funds invoices in order of finalization time.
Three details in that order trip people up.
Reference matching is capped at the transfer. Stripe says "For reference matching, Stripe applies no more than the amount of the bank transfer that triggered reconciliation." But the later steps look at the whole cash balance: "Automatic reconciliation considers the customer's entire available cash balance in the payment currency, including unreconciled funds from earlier bank transfers." So last month's stray $300 can combine with today's transfer to pay an invoice the customer never mentioned.
The 365-day line. For amount-based and multi-invoice matching, Stripe "can only reconcile cash balance funds to open or past due invoices that are less than 365 days overdue." A reference match ignores that limit: "Stripe reconciles the transfer to the matched invoice regardless of how long it's been overdue." If a customer is finally paying a very old invoice, the invoice number in the memo is what makes it land.
Partial payments need two things. Stripe's invoicing guide is blunt: "Invoices won't be partially funded and remain open until incoming funds cover the full invoice amount." The exception is a setting called Automatically reconcile partial bank transfer payments, and even then "We only attempt a partial reconciliation if your customer provides an invoice number in the transfer memo." A short transfer with no invoice number in the memo waits in the cash balance.
There is one more trigger people miss. When you finalize a new invoice, Stripe checks the cash balance too, but only applies it "if it can fully pay the invoice after accounting for your configured underpayment threshold." Otherwise the money stays put.
A worked example: one transfer, three invoices
Northwind Studio has three open Stripe invoices, all in USD, none of them more than 365 days overdue:
| Invoice | Amount | Due |
|---|---|---|
| INV-0101 | $1,200 | October 1 |
| INV-0102 | $800 | October 15 |
| INV-0103 | $2,000 | November 1 |
Northwind sends $2,000 with the memo "INV-0102 and payment on account."
Step 1, reference match. The memo contains INV-0102. Stripe applies $800 to it, which pays it in full. $1,200 is left in the cash balance.
Step 3, exact amount. There's no second invoice number to match, so Stripe looks for open invoices that add up exactly to the $1,200 still available. INV-0101 is exactly $1,200. Stripe applies the funds and INV-0101 is paid.
The cash balance is now zero. INV-0103 stays open for the full $2,000. Northwind probably meant "on account" as a down payment on INV-0103. Stripe has no way to read that, and the exact-amount rule found a cleaner match.
What QuickBooks should end up with: INV-0101 and INV-0102 each closed by a $1,200 and an $800 payment, and INV-0103 still open for $2,000. Stripe sends invoice.paid for each invoice it pays, and its documentation shows payment_intent.succeeded alongside. Each one is an ordinary invoice payment, which is good news: nothing about the bank transfer route needs special handling in QuickBooks once an invoice is actually paid.
Now the second transfer. Two weeks later Northwind sends $1,950 for INV-0103 with no memo. No reference. No invoice or group of invoices adds up to exactly $1,950. INV-0103 can't be fully funded. So nothing is applied, and Stripe sends the cash_balance.funds_available webhook. Stripe's invoicing guide describes this case: "When funds transferred to Stripe aren't reconciled to any open PaymentIntents or invoices, the funds are placed in the customer balance."
In Stripe, INV-0103 still says $2,000 due. In QuickBooks it should say the same, because nothing has been paid yet. If the $50 gap is a bank fee on an international wire, our explainer on OUR, SHA and BEN wire charge codes covers where it went. Either way, you decide how to close the gap. Ask for the $50, issue a credit note for it, or use Stripe's underpayment threshold if you've set one.
What QuickBooks should show while money waits in the cash balance
This is the step that confuses bookkeepers, because the money has clearly left the customer's bank and yet nothing should change in QuickBooks.
Look at where the funds are. Stripe's cash balance transaction types draw the line. A funded transaction means "The customer has funded their balance by making a bank transfer." An applied_to_payment transaction means funds "were applied to a PaymentIntent." Only at the second step does the money become a payment, and bank transfer payments settle to your Stripe balance on your standard payout schedule. While it sits unapplied, it is not in your Stripe balance and it is not in a payout.
So in the Northwind example, the $1,950 doesn't belong on a QuickBooks deposit or a QuickBooks payment yet. INV-0103 stays open in QuickBooks, which is correct, because it is open in Stripe.
Two practical points follow.
Don't record the money in QuickBooks by hand. If someone sees $1,950 on the customer's bank remittance and enters a QuickBooks payment against INV-0103, QuickBooks now says the invoice is mostly paid while Stripe still says $2,000 is due. When Stripe later pays the invoice from the cash balance, the second payment arrives on top of the first. Close the gap in Stripe, and let QuickBooks follow.
Track unapplied cash balances as a list, not as an entry. Stripe's Dashboard has a Remaining balance filter on the customer list that shows every customer with unreconciled funds and the date Stripe will try to return them. At month end, that list is your reconciling item. Large or old balances are worth a conversation with your accountant about whether they need a customer deposit or similar liability in your books. The answer depends on your accounting basis and how material the amounts are.
Applying cash balance funds yourself
Some businesses switch customers to manual reconciliation. A customer with a dozen open invoices who sends round-number transfers is the usual reason: automatic matching will pick something, and it may not be what the customer meant.
You can change the mode for everyone in the Bank Transfers reconciliation settings, or per customer from the Cash Balance row on the customer's page. In manual mode, Stripe says "Stripe doesn't automatically apply any funds from the customer balance."
To apply funds to an invoice in the Dashboard, open the invoice, click Charge customer, and choose Cash Balance as the payment method. Stripe notes that Cash Balance "appears as a payment method only if the invoice accepts bank transfers and the customer has a cash balance in the invoice's currency." Unlike automatic mode, the Dashboard lets you "partially or fully fund an invoice."
Stripe's payment application guide adds a fix for mistakes that have already happened. A payment can only be applied whole: "You can't apply a portion of a payment toward an invoice." If a bank transfer payment landed on the wrong invoice, Stripe's route is to "refund the payment to the cash balance and then apply the funds across different invoice amounts." Stripe tells you to disable auto-reconciliation first, so the refunded funds don't get matched again on their own. Unapplying is limited to invoices whose collection method is send_invoice, which is the collection method in Stripe's own bank transfer invoice examples.
For QuickBooks, every one of these moves changes which invoice is paid. Reopening a paid invoice is the kind of event Stripe itself warns about: "if you rely on Stripe events to update a downstream accounting system, confirm whether your integration is ready to handle an invoice being reopened." If you move a bank transfer from one invoice to another in Stripe, check both invoices in QuickBooks afterwards. The QuickBooks Customer Balance Detail report is the quickest place to see a payment sitting on the wrong invoice.
Overpayments and money nobody claims
When a customer sends more than they owe, Stripe pays what it can match and "keep the remaining excess amount in the customer balance." The same webhook fires. The excess waits.
It doesn't wait forever. Stripe's rule, from the reconciliation guide: "If funds remain unreconciled for 75 days, Stripe automatically attempts to return the aged portion to the customer's bank account." Each transfer runs on its own clock: "Newer funds remain in the cash balance and follow their own 75-day timeline." And at 90 days: "If the aged funds remain at the 90-day mark, we transfer that portion to your Stripe account balance. The 90-day action isn't another return attempt."
That 90-day transfer is the one event in this flow that changes your books without an invoice. The cash balance transaction type is transferred_to_balance: "Funds have been moved from the cash balance to your Stripe balance due to failed refunds or insufficient refund details." On your side of Stripe it arrives as a balance transaction of type payment_unreconciled, which Stripe describes as "Created when a customer has unreconciled funds within Stripe for more than ninety days. This balance transaction transfers those funds to your balance." From that moment the money is in your Stripe balance and goes out in your next payout, with no invoice or payment attached.
Stripe still expects you to get it back to the customer: "Coordinate directly with the customer to make sure they receive the returned funds." Ask your accountant whether it should sit in a liability until you return it or the customer agrees to apply it, rather than staying in income. Our post on Stripe unreconciled payments covers this balance transaction in depth, and the one on Stripe invoice overpayments covers the card and credit balance side of overpayments, which works differently.
For USD transfers, one more wrinkle. Stripe says "USD bank transfers that go through the ACH network in the US can be reversed," and "A reversal must be sent no later than 5 days after the payment." A reversal shows up in the cash balance as funding_reversed, and if it drives the balance negative, Stripe returns funds as adjusted_for_overdraft. Treat a USD cash balance as settled only after that window.
Refunding a bank transfer payment
Stripe's refund guide for bank transfers gives you two destinations, and they behave very differently.
Refund to the customer's bank account. Stripe needs the customer's bank details, which it sometimes has from the transfer. If not, it emails the customer. The refund sits in requires_action until they respond, and "Customers have 45 days from receipt of the request to submit bank account details." After that it fails, and you "must return the funds to your customer outside of Stripe." You can refund "up to 180 days after it was created," and Stripe notes that each refund "might incur a fee."
Refund to the customer's cash balance. This one "succeeds immediately," and Stripe says refunds to the cash balance "are free of charge." The money leaves your Stripe balance and goes back into the customer's cash balance, ready for their next invoice. This is also the tool behind the reapply fix above.
Refund a leftover cash balance. You can also send unapplied funds back without any payment involved: on the customer's page, expand Cash Balance and click Initiate Refund. Stripe's API version uses origin=customer_balance.
International wires are the exception to all of this. Stripe says "Stripe doesn't support refunds for international wires. You're responsible for making any refunds related to these payments."
On the QuickBooks side, a refund of an invoice payment is a refund like any other: the money left your Stripe balance and the customer's invoice was paid. A refund that only empties an unapplied cash balance never touched QuickBooks in the first place, so there is nothing to reverse. If you booked swept funds to a liability, record the return out of that liability. If the customer's credit sits in QuickBooks Accounts Receivable instead, Intuit's method for refunding a customer credit is a check or expense against Accounts Receivable, linked to the customer's credit through Receive payment.
What Acodei documents, and where it stops
Acodei's Invoice Sync documentation describes the invoice side clearly. When a Stripe invoice is finalized, Acodei creates a QuickBooks invoice that reproduces its line items and tax lines as your mapping settings allow. When the invoice is paid, Acodei creates a payment receipt and applies it to that QuickBooks invoice. The documented triggers for the payment are invoice.paid or charge.succeeded, and the documented prerequisite is that QuickBooks Automatic Application is on. Acodei's guidance is to keep it on, so payments and credit memos settle invoices automatically. Our glossary entry on QuickBooks Automatic Application explains the setting.
One part of this flow is covered in a different Acodei page. Acodei imports the payment_unreconciled balance transaction, and its Balance Transaction Handling documentation says it is recorded as other income in QuickBooks, usually on the daily summary deposit for that date, using the default product. If your accountant wants those funds in a liability instead, a journal entry out of the income account moves them without editing the synced record.
The rest of the cash balance isn't covered: funding, unapplied funds and cash balance refunds. The documentation doesn't single out bank transfer payments either. So we won't claim what Acodei does with any of those. When you take your first bank transfer payment, check that invoice in your Acodei Data Feed and in QuickBooks before you rely on it.
The safe pattern is the same with or without an integration. Do every bank transfer decision in Stripe, whether that is applying, unapplying, crediting or refunding, and treat QuickBooks as the record of what Stripe has actually paid. To see how invoices and their payments reach QuickBooks, read about Acodei's invoice sync for Stripe and QuickBooks, or start a free trial.
Month-end checklist for Stripe bank transfers
- Open the Remaining balance filter on Stripe's customer list. Every customer on it has unreconciled funds and a return date.
- For each, decide: apply to an open invoice, credit the gap, or return the money. Don't leave it for the 75-day return.
- Look for
payment_unreconciledbalance transactions. Each one is customer money in your payout with no invoice. Decide with your accountant whether it stays in income or moves to a liability. - For USD, don't treat a transfer from the last five days as final.
- Compare Stripe's open invoices with QuickBooks' Open Invoices report. An invoice open in Stripe should be open in QuickBooks, even if the customer has already sent money.
- Check any invoice you reopened or reapplied in Stripe this month in QuickBooks too.
- Ask customers to put the invoice number in every transfer memo. It is the only thing that makes Stripe pay the invoice they meant.
Frequently Asked Questions
How does Stripe decide which invoice a bank transfer pays?
Stripe first looks for an invoice number in the transfer reference. Without one, it looks for one to five open invoices or PaymentIntents that add up exactly to the available cash balance. If none match, it fully pays the oldest due invoices it can. Anything left stays in the customer's cash balance.
Why is my Stripe invoice still open after the customer sent a bank transfer?
Most likely the transfer was short and had no invoice number in the memo. Stripe doesn't partially fund invoices from bank transfers unless you enable automatic partial reconciliation and the customer includes the invoice number. The funds wait in the customer's cash balance until you apply them, credit the difference, or the customer sends the rest.
Should I record unapplied cash balance funds in QuickBooks?
Not as a payment. Funds in a Stripe cash balance aren't in your Stripe balance or your payouts until Stripe applies them to an invoice or PaymentIntent. Keep the QuickBooks invoice open to match Stripe, and track unapplied balances from Stripe's Remaining balance filter. Ask your accountant whether large balances need a liability.
What happens to unreconciled bank transfer funds in Stripe?
After 75 days, Stripe tries to return the aged funds to the customer's bank account. If they are still there at 90 days, Stripe moves them into your Stripe account balance, where they are paid out with no invoice attached. Stripe says to coordinate with the customer so they receive the funds, so ask your accountant whether it belongs in a liability until then.
Can I refund a Stripe bank transfer payment?
Yes, to the customer's bank account or to their cash balance. A bank refund needs the customer's bank details, and they have 45 days to supply them. A refund to the cash balance succeeds immediately and is free. Stripe doesn't support refunds for international wires, so you return those yourself.
The short version
A Stripe bank transfer goes into the customer's cash balance first and becomes a payment only when Stripe matches it to an invoice. Stripe matches by invoice number, then exact amount, then oldest due, and never part-pays an invoice without your setting and an invoice number in the memo. While money waits in the cash balance, it isn't yours, and QuickBooks should show the invoice as open. At 90 days, unclaimed funds move into your balance as a payment_unreconciled transaction, and they are still owed back to the customer. Make every decision in Stripe, and let QuickBooks record what Stripe has paid.
Automate your Stripe to QuickBooks sync
Save hours every month. Acodei automatically syncs your Stripe transactions, invoices, and payouts to QuickBooks Online.
14-day free trial · card required · cancel anytime
How Acodei handles this in your stack
Stripe QuickBooks Integration
See how Acodei syncs Stripe payments, fees, refunds, invoices, and payouts into QuickBooks Online automatically.
Or go straight to a capability
Advanced Product Mapping
Map Stripe products to QuickBooks with rule-based logic on product ID, price ID, metadata, and account. Set rule priority and extend mapping to refunds and fees.
Automated Invoice Sync
Bring Stripe invoices into QuickBooks and auto-apply payments and credit memos, with invoice numbering suffixes and quantity tracking to cut double-entry.
Multi-Currency Mastery
Sync Stripe transactions across currencies with automatic exchange rate handling and currency-specific customer records. Our team enables multicurrency on request, and zero-decimal currencies such as JPY are not supported.
Class Mapping
Map Stripe products to QuickBooks classes for scalable categorization and multi-entity reporting. Class tracking requires QuickBooks Online Plus or Advanced.
Historical Data Import
Backfill historical Stripe data into QuickBooks by month range. Preview volume and cost before syncing so reporting starts from a complete baseline.
How to Connect Stripe to QuickBooks Online
Connect Stripe to QuickBooks Online in minutes. Acodei links both accounts with secure OAuth and syncs payments, fees, refunds, and payouts automatically.
Reconcile Stripe Payments in QuickBooks
Reconcile Stripe in QuickBooks Online automatically. Acodei splits out fees, matches payouts to deposits, and keeps every charge audit-ready.
Get more operational finance guides like this one
We will only send high-value product and finance content.